PUBLICATION LIST OF MANAB KUMAR DAS

 

A) articles in journals:

 

 

Google scholar citation:




1.      S. Pramanik and M.K. Das, Numerical Study of Turbulent Wall Jet Over Multiple-Inclined Flat Surface, accepted for publication in Computers & Fluids.

 

2.      D.K. Patel, M.K. Das and S. Roy, LES of Turbulent Flow in a Cubical Cavity with Two Parallel Lids Moving in Opposite Direction, accepted for publication in International Journal of Heat and Mass Transfer.

 

3.      D.K. Patel, M.K. Das and S. Roy, LES of Incompressible Turbulent Flow Inside a Cubical Cavity Driven by Two Parallel Lids Moving in Opposite Direction, International Journal of Heat and Mass Transfer, 67 1039–1053, 2013.

 

4.     S. Pramanik and M.K. Das, Mean flow and turbulent characteristics of an Oblique Offset Jet, Computers & Fluids, 77, Pages 36-55, 2013.

 

5.     S.K. Rathore and M.K. Das, Comparison of two low-Reynolds number turbulence models for fluid flow study of wall bounded jets, International Journal of Heat and Mass Transfer, Volume 61, Pages 365–380, June 2013.

6.      S. Pramanik and M.K. Das, Computational Study of a Turbulent Wall Jet Flow on an Oblique Surface, in press, International Journal of Numerical Methods for Heat and Fluid Flow.

7.      S. Pramanik, A.M. Achari and M.K. Das, Numerical Simulation of a Turbulent Confined Slot Impinging Jet, Industrial & Engineering Chemistry Research, 51, 9153-9163, 2012.

8.      Muthtamilselvan, M., and Das, M. K., Double Diffusive Convection in a Porous Cavity Near its Density Maximum, Journal of Porous Media, 15 (8): 765–774, 2012.

9.      Kumar, A., and Das, M.K., Study of a turbulent dual jet consisting of a wall jet and an offset jet, ASME Journal of Fluids Engineering. Vol. 133 / 101201-1, OCTOBER 2011.

10.  Tiwari, R.K., and Das, M.K., Transient Mixed Convection in a Two-Sided Lid-Driven Differentially Heated Square Cavity Utilizing Nanofluids, Proceedings of the Institution of Mechanical Engineers, Part N Journal of Nanoengineering and Nanosy, 223(2), 63-74 (2010)

11.  Vishnuvardhanarao, E. and Das, M. K.,  Buoyancy Opposed Mixed Convection in a Two-Sided Lid-Driven Differentially Heated Square Cavity Filled With a Porous Medium, Journal of Porous Media, 13(12), 1059–1072 (2010)

12.  Muthtamilselvan, M. M., Das, M. K., and Kandaswamy, P., Convection in a Lid-Driven Heat-Generating Porous Cavity with Alternative Thermal Boundary Conditions, Transport in Porous Media, 82:337–346 (2010)

13.  Das, M.K. and Devangre, R.B., Conjugate Mixed Convection Heat Transfer in Plane Laminar Wall Jet Flow, Numerical Heat Transfer, Part A, 56: pp.60–75 (2009)

14.  Kanna, P.R., and Das, M.K., Effect of Geometry on the Conjugate Heat Transfer of Wall Jet Flow over Backward-Facing Step, ASME Transaction: Journal of Heat Transfer, 131 / 114501-1 (2009)

15.  Vishnuvardhanarao, E., and Das, M.K., Conjugate Heat Transfer Study of Incompressible Turbulent Offset Jet Flows, Heat and Mass Transfer, 45, pp. 1141–1152 (2009)

16.  Vishnuvardhanarao, E., and Das, M.K., Study of the Heat Transfer Characteristics in a Turbulent Combined Wall and Offset Jet Flows, International Journal of Thermal Sciences, 48, pp. 1949–1959 (2009)

17.  Kumar, D.S., Kumar, K.S., and Das, M.K., A Fine Grid Solution for a Lid Driven Cavity Flow Using Multigrid Method, Engineering Applications of Computational Fluid Mechanics, 3, No.3, pp.336-354 (2009)

18.  Raja, K.K., Das, M.K. and Kanna, P.R., Numerical Study of Mixed Convection in a Two-Dimensional Laminar Incompressible Offset Jet flow, International Journal of Heat and Mass Transfer, Volume 52, Issues 3-4, Pages 1023-1035, 2009.

 

19.  Vishnuvardhanarao, E., and Das, M.K., Mixed Convection in a buoyancy-assisted two-sided lid-driven cavity filled with a porous medium, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 19 Iss: 3/4, pp.329 – 351, 2009.

 

20.  Kanna, P.R. and Das, M.K., Heat Transfer Study of Two-Dimensional Laminar Incompressible Offset Jet flows, International Journal of Thermal Sciences, 47, 1620–1629, 2008.

 

21.  Vishnuvardhanarao, E., and Das, M.K., Computational Study of Heat Transfer in a Conjugate Turbulent Wall Jet Flow with Constant Heat Flux, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 19 No. 1, pp. 39-52, 2009.

 

22.  Vishnuvardhanarao, E., and Das, M.K., Computational Study of Heat Transfer in a Conjugate Turbulent Wall Jet Flow at High Reynolds Number, Journal of Heat Transfer, JULY 2008, Vol. 130 / 072201-1-7.

 

23.  Vishnuvardhanarao, E., and Das, M.K., Computation of Mean Flow and Thermal Characteristics of Incompressible Turbulent Offset Jet Flows, Numerical Heat Transfer: Part A, 53: 843–869, 2008.

 

24.  Vishnuvardhanarao, E., and Das, M.K., Study of Conjugate Heat Transfer from a Flat Plate by Turbulent Offset Jet Flow, Numerical Heat Transfer: Part A, 53: 524–542, 2008.

 

25.  Dalal, A. and Das, M. K., Heatline method for the visualization of natural convection in a complicated cavity, International Journal of Heat and Mass Transfer, 51, 263–272, 2008.

 

26.  Vishnuvardhanarao, E., and Das, M.K., Laminar Mixed Convection in a Parallel Two-Sided Lid-Driven Differentially Heated Square Cavity Filled with a Fluid-Saturated Porous Medium, Numerical Heat Transfer: Part A, 53, 88–110, 2008

 

27.  Das, M.K. and Kanna, P.R., Application of an ADI Scheme for Steady and Periodic Solutions in a Lid-Driven Cavity Problem, International Journal of Numerical Methods for Heat & Fluid Flow, 17 (8), 799-822, 2007.

 

28.  Raja, K.K., Das, M.K. and Kanna, P.R., Transient Study of Buoyancy-Assisted Mixed Convection in Laminar Plane Wall Jet Flow, International Communications in Heat and Mass Transfer, 34, 809–819, 2007.

 

29.  Raja, K.K., Kanna, P.R. and Das, M.K., Numerical Simulation of Mixed Convection in a Two-Dimensional Laminar Plane Wall Jet Flow, Numerical Heat Transfer: Part A,  52: 621–642, 2007.

 

30.  Prasad, Y.S. and Das, M.K., Hopf Bifurcation in Mixed Convection Flow inside a Rectangular Cavity, accepted for publication in International Journal of Heat and Mass Transfer, Vol. 50, pp. 3583-3598, 2007.

 

31.  Tiwari, R.K., and Das, M.K., Heat Transfer Augmentation in Two-Sided Lid-Driven Differentially Heated Square Cavity Utilizing Nanofluids, International Journal of Heat and Mass Transfer, Vol. 50, pp. 2002-2018, 2007.

 

32.  Dalal, A. and Das, M. K., Numerical Study of Laminar Natural Convection in a Complicated Cavity Heated from Top with Sinusoidal Temperature and Cooled from Other Sides, Computers and Fluids, vol. 36, issue 4, pp. 680-700, May 2007. (Top 25 Most Downloaded Articles – July-September 2007)

 

33.  Kanna, P.R. and Das, M.K., Conjugate Heat Transfer Study of Two-Dimensional Laminar Incompressible Wall Jet over Backward-Facing Step, ASME Transaction: Journal of Heat Transfer, Vol. 129, no. 2, pp. 220-231, 2007.

 

34.  Das, M.K. and Reddy, K.S.K., Conjugate Natural Convection Heat Transfer in an Inclined Square Cavity containing a Conducting Block, International Journal of Heat and Mass Transfer, Vol.  49, pp. 4987–5000, 2006.

 

35.  Kanna, P.R. and Das, M.K., Numerical Simulation of Two-Dimensional Laminar Incompressible Wall Jet Flow over Backward-facing step flows, ASME Transaction: Journal of Fluids Engineering, Vol. 128, pp. 1023-1035, 2006.

 

36.  Kanna, P.R., and Das, M.K., Conjugate Heat Transfer Study of Backward-Facing Step Flow - a Benchmark Problem, International Journal of Heat and Mass Transfer, Vol. 49, no. 21-22, pp. 3929–3941, 2006.

 

37.  Dalal, A. and Das, M.K., Natural Convection in a Cavity with a Wavy Wall Heated from Below and Uniformly Cooled from the Top and Both Sides, ASME Transaction: Journal of Heat Transfer, Vol. 128, no. 7, pp. 717-725, 2006.

 

38.  Kanna, P.R. and Das, M.K., Heat Transfer Study of Two-Dimensional Laminar Incompressible Wall Jet over Backward-Facing Step, Numerical Heat Transfer Part A Volume 50, Number 2 / July 15, pp. 165-187, 2006.

 

39.  Kanna, P.R. and Das, M.K., A Short Note on the Entrainment and Exit Boundary Conditions, International Journal for Numerical Methods in Fluids, Volume 50, Issue 8, pages 973-985, 2006.

 

40.  Dalal, A., and Das, M.K., Natural Convection in a Rectangular Cavity Heated from Below and Uniformly Cooled from the Top and Both Sides, Numerical Heat Transfer: Part A, Part A, 49: 301–322, 2006.

 

41.  Kanna, P.R. and Das, M.K., A Short Note on the Reattachment Length for BFS Problem, International Journal for Numerical Methods in Fluids, Volume 50, Issue 6, pp. 683-692, 2006.

 

42.  Kanna, P.R. and Das, M.K., Numerical Simulation of Two-Dimensional Laminar Incompressible Offset Jet Flows, International Journal for Numerical Methods in Fluids, Vol. 49, Issue 4, pp. 439-464, 2005.

 

43.  Kanna, P.R. and Das, M.K., Conjugate Heat Transfer Study of Two-Dimensional Laminar Incompressible Offset Jet flows, Numerical Heat Transfer: Part A, Volume 48, Number 7 / October 15, 671 – 691, 2005.

 

44.  Dalal, A. and Das, M. K., Laminar Natural Convection in an Inclined Complicated Cavity with Spatially Variable Wall Temperature, International Journal of Heat and Mass Transfer, Volume 48, Issue 18, Pages 3833-3854, August 2005. (Top 25 Most Downloaded Articles – July-September 2005)

 

45.  Kanna, P.R. and Das, M.K., Conjugate Forced Convection Heat Transfer from a Flat Plate by Laminar Plane Wall Jet Flow, International Journal of Heat and Mass Transfer, Volume 48, Issue 14, Pages 2896-2910, July 2005.

 

46.  Das, M. K., and Ghoshdastidar, P.S., Experimental Validation of a Quasi Three-Dimensional Conjugate Heat Transfer Model for the Metering Section of a Single-Screw Plasticating Extruder, Journal of Materials Processing Technology, Vol. 120/1-3, pp. 397-411, Jan 2002.

 

47.  Das M. K., and Ghoshdastidar, P.S., A Quasi 3D Computer Model of the Thermal Transport Processes in the Metering Section of a Single-Screw Plasticating Extruder, Journal of Energy, Heat and Mass Transfer, Vol. 22, pp.223-236, 2000.

 

48.  Jones D.R.S., Ghoshdastidar P.S., Muju M.K. and Das M. K., The Design of Large Single-screw Melt Extruder using a Quasi Two-dimensional Conducting Screw Computer Model, ASME Journal of Manufacturing Science and Engineering, Vol. 119, No. 4(A), pp. 644-648, November 1997.

 

49.  Das M. K. and Ghoshdastidar P.S., A Computer Study of Quasi Two-dimensional and Fully Two-dimensional Computer Models of Flow and Conjugate Heat Transfer in the Metering Section of a Single-screw Plasticating Extruder, Journal of Energy Heat and Mass Transfer, Vol.17, pp. 33-42, 1995.


                                                                                                                                BACK

 

 

 

B) articles in conferences:

 

1.      Pramanik, S and Das, M. K., Turbulent Wall Jet on Multiple-flat-plate Deflector, 22nd National and 11th ISHMT-ASME Heat and Mass Conference, IIT Kharagput, India., 2013.

 

2.      Achari, A. M. and Das, M.K., Conjugate Heat Transfer Analysis of a Confined Slot Impinging Jet, Proceedings of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India

 

3.      Mondal, T., Guha, A. and Das M. K., Analysis Of Conjugate Heat Transfer For Combined Wall Jet And Offset Jet, Proceedings of the 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India

 

4.      Patel, D. K., Das, M. K., Roy, S., 2013. LES of turbulent flow inside a lid-driven cavity with parallel lids moving in opposite direction. Proceedings of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India 

 

5.      Rathore, S. K., Das, M. K., 2013. Effect of freestream motion on heat transfer characteristics of turbulent offset jet.  Proceedings of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India

 

6.      Mondal, T., Guha, A. and Das M. K., Numerical Study on Turbulent Dual Offset Jets, Fourth International Congress on Computational Mechanics and Simulation, IIT Hyderabad, India, 2012.

 

7.      Pramanik, S and Das, M. K., Numerical Study of Flow Field and Thermal Characteristics of Two Plane Parallel Jets, Fourth International Congress on Computational Mechanics and Simulation, IIT Hyderabad, India, 2012.

 

8.      Achari, A. M. and Das, M.K., Computational Analysis of a Turbulent Confined Slot Impinging Jet,  International Conference on Applications of Fluid Engineering, 20-22 September, 2012, G. L. Bajaj Institute of Technology &Management, Greater Noida.

 

9.      Pramanik, S. and Das, M. K., eflection of a Turbulent Wall Jet Along a Multiple Inclined Flat Plate, International Conference on Application of Fluid Mechanics, GLBITM, Greater Noida, India, 2012.

 

10.  Rathore, S. K., Das, M. K., 2012. Low Reynolds number modeling of an offset jet. International Conference on Applications of Fluid Engineering, 20-22 September, 2012, G. L. Bajaj Institute of Technology &Management, Greater Noida.

 

11.  Vishnuvardhanarao , E., and Das, M.K., Computation of Mean Flow and Thermal Characteristics of Incompressible Turbulent Offset Jet Flows, presented to 19th National & 8th ISHMT-ASME Heat and Mass Transfer Conference, January 3 - 5, 2008, JNTU Hyderabad, India.

 

12.  Vishnuvardhanarao, E. and Das, M. K., Mixed Convection Flow in a Two-Sided Lid-Driven Cavity Filled With a Fluid-Saturated Porous Medium, presented in 2nd International Congress on Computational Mechanics and Simulation, December 8-10, 2006, held in IIT Guwahati, India.

 

13.  Khandelwal, S., Das, M. K. and Saha, U. K., Laminar Flow Computations in Compressor Cascades Using Incompressible Unsteady Complex Geometry Flow Solver, Proceedings of 50th Congress of ISTAM (An International Meet) IIT-Kharagpur, December 14-17, 2005, pp. 81-87.

 

14.  Kanna, P.R. and Das, M.K., Flow and Heat Transfer Study of Two-Dimensional Laminar Incompressible Offset Jet flows, Proceedings of 50th Congress of ISTAM (An International Meet) IIT-Kharagpur, December 14-17, 2005.

 

15.  Kanna, P.R. and Das, M.K., Conjugate Heat Transfer Study of Two-Dimensional Laminar Incompressible Offset Jet flows, Proceedings of 50th Congress of ISTAM (An International Meet) IIT-Kharagpur, December 14-17, 2005.

 

16.  Dalal, A. and Das, M.K., Natural Convection in a Square Cavity Heated from Below and Uniformly Cooled from the Top and Both Sides, Proceedings of 50th Congress of ISTAM (An International Meet) IIT-Kharagpur, December 14-17, 2005, pp. 237-247. 

 

17.  Dalal, A. and Das, M. K., Natural Convection in a Cavity with a Wavy Wall Heated from Below and Uniformly Cooled from the Top and Both Sides, presented in 18th National & 7th ISHMT & ASME Heat and Mass Transfer conference, IIT Guwahati, January 4-6, 2006, pp. 397-404.

 

18.  Kanna, P.R., and Das, M. K., "Numerical Heat Transfer Study of Two-Dimensional Laminar Incompressible Offset Jet flows", presented in 18th National & 7th ISHMT & ASME Heat and Mass Transfer conference, IIT Guwahati, January 4-6, 2006, pp. 866-871.

 

19.  Kanna, P.R., and Das, M. K., Conjugate Forced Convection Heat Transfer From a Flat Plate by Laminar Plane Wall Jet Flow, accepted in 2005 Summer ASME Heat Transfer Conferences, July 17-22, 2005, San Francisco, USA (presentation only).

 

20.  Dalal, A. and Das, M. K., Natural Convection in a Square Cavity Heated from Below and Uniformly Cooled from the Top and Both Sides, draft accepted in 2005 Summer ASME Heat Transfer Conferences, July 17-22, 2005, San Francisco, USA (presentation only).

 

21.  Kanna, P.R., and Das, M. K., Flow And Heat Transfer Study Of Two-Dimensional Laminar Incompressible Offset Jet flows, submitted to 2005 Summer ASME Heat Transfer Conferences, July 17-22, 2005, San Francisco, USA (presentation only).

 

22.  Kanna, P.R., and Das, M. K., Conjugate Heat Transfer Study Of Two-Dimensional Laminar Incompressible Offset Jet Flows, accepted in 2005 Summer ASME Heat Transfer Conferences, July 17-22, 2005, San Francisco, USA (presentation only).

 

23.  Das, M.K., Dutta, S. and Saha, U. K., Flow over a Backward-Facing Step in Finite Volume Method with Complex Geometry Formulation, 49th Congress of ISTAM, Dec. 27-30, 2004, NIT Rourkela, pp. 253-261.

 

24.  Das, M.K., Dutta, S., and Saha, U.K., Flow over a Backward-Facing Step in Finite Volume Method, presented in 31st National conference on FMFP, December 16-18, 2004, Jadavpur University, pp.182-189.

 

25.  Kanna, P.R., and Das, M. K., Conjugate Forced Convection Heat Transfer from a laminar Plane Wall Jet Flow, presented in 17th National Heat & Mass Transfer Conference, & 6th ISHMT – ASME Heat & Mass Transfer Conference, Kalpakkam, India, 5-7th January 2004.

 

26.  Dalal, A. and Das, M. K., Laminar Natural Convection in a Complicated Cavity with Spatially Variable Upper Wall Temperature, 2003 Summer ASME Heat Transfer Conferences, July 21-23, 2003, Las Vegas, Nevada, USA.

 

27.  Kadam, H. B., Saha, U. K., and Das, M. K., Computer Aided Aerodynamic Design of Axial Flow Compressors, Seventh  Triennial International Symposium on Fluid Control, Measurement and Visualization (FLUCOME'03), Sorrento, Italy, August 25-28, 2003.

 

28.  Badjatiya, S. and  Das M. K., Comparison of Heat Transfer Coefficient Correlation for Laminar Plane Wall Jet, 6th ASME JSME Thermal Engineering Joint Conference , March 16-20, 2003, Hawaii, USA.

 

29.  Kadam, H. B., Saha, U. K., and Das, M. K., Stage-By-Stage Aerodynamic Design of Multistage Axial Flow Compressors, 2nd International and 29th National Conference on Fluid Mechanics and Fluid Power, IIT Roorkee, India, Dec 12-14, 2002, pp.836-845.

 

30.  Das M. K., and Badjatiya, S., Conjugate Heat Transfer Study of Plane Laminar Wall Jet Flow, 12th International Heat Transfer Conference, Grenoble, France, August 2002, 10-BiotA-06, Volume 2, page: 315.

 

31.  Das, M. K., Quasi Three-Dimensional Flow Computation and Its Effect on Residence Time Distribution In a Single-Screw Plasticating Extruder, presented at Sixteenth National Heat and Mass Transfer Conference and Fifth ISHMT/ASME Heat and Mass Transfer Conference, January 3-5, 2002 at Science City, Kolkata(Calcutta), India, page:1053-1059.

 

32.  Ghoshdastidar P.S., Jones S., Muju M.K. and Das M. K., The Design of Large Single-screw Melt Extruder using a Quasi Two-dimensional Conducting Screw Computer Model, Proc. ASME Winter Annual Meeting, Chicago, Nov.6-11,1994.

 

33.  Das M. K. and Ghoshdastidar P.S., Quasi Two-dimensional and Fully Two-dimensional Computer Models of Flow and Conjugate Heat Transfer in the Metering Section of a Single Screw Plasticating Extruder: A Comparative Study, Proc. 10th Intl. Heat Transfer Conference, Brighton, UK, August 14-18, (Session : Numerical Technique and Modeling), Vol.2, pp. 331-336.

 

34.  Das M. K. and Ghoshdastidar P.S., A Quasi Three-dimensional Computer Model of  Flow and Conjugate Heat Transfer in the Metering Section of a Single Screw Plasticating Extruder. Proc. ASME/AIAA Thermophysics and Heat Transfer Conf., Colorado, USA, June 20-23,1994, ASME HTD Vol. 275, pp. 123-133.

 

35.  Das M. K. and Ghoshdastidar P.S., A Two-dimensional Computer Model of Fluid Flow and Conjugate Heat Transfer in a Single Screw Plasticating Extruder. 28th National  Heat Transfer Conf. (Chapter: Modern developments in numerical simulation of  flow and heat transfer.. July 1992. California. pp.: 25-36.

 

36.  Das M. K. and Ghoshdastidar P.S., Numerical Simulation of Fluid Flow and Conjugate Heat Transfer in a Single Screw Plasticating Extruder. 7th Intl.  Conf on Numerical Methods for Thermal Problems. July 1991. Stanford. PP: 1451-1465.

 

                                                                                          BACK